Steiger Panther III PTA-325 specifications

Steiger Panther III PTA-325

Construction years:

1980 - 1982   III Series

Tractor type:

Four-wheel Drive (4WD) tractor
Steiger Panther III PTA-325

Manufacturer: Steiger

Factory: Fargo, North Dakota, USA

Distributor: -

Steiger Panther III PTA-325

Rear Type: III*

Rear lift: -

Control: -

Rear lift (at ends): -

Rear lift (at 24"/610mm): -

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Steiger Panther III PTA-325

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Steiger Panther III PTA-325

Number: 4

Cold-cranking amps: 475

Volts: 12

Amp-hours: -

Steiger Panther III PTA-325

Fuel: 225 gal

Hydraulic system: 22 gal

Steiger Panther III PTA-325

Ag front: 23.1x34

Ag rear: 23.1x34

Weight (shipping): 29605 lbs

Wheelbase: 132.5 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 264.5 inches

Height (hood): 94.7 inches

Ground clearance: -

Rear tread: -

Front tread: -

2WD turn radius: -

Width: 52 inches

Standard tires (ag): -

Height (cab): -

Max weight: 34,000 lbs

Front axle: -

Rear axle: -

Steiger Panther III PTA-325

Ground: negative

Charging system: Delco-Remy alternator

Charging amps: 90

Battery volts: -

Steiger Panther III PTA-325

Bore/Stroke: 4.75x6.00 inches

Compression: 15:1

Cooling: -

Cylinders: -

Displacement: 638 ci

Fuel: -

Rated RPMs: 2100

Power: 325 hp

Torque: 1015 lb-ft

Torque RPM: 1200

Emissions: -

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: -

Starter volts: 12

Steiger Panther III PTA-325

Chassis: 4x4 articulated 4WD

Steering: articulated power

Brakes: hydraulic disc

Cab: Safari Cab standard with air-conditioning.

Differential lock: -

Transmission: 20-speed

Pump flow: 29.3 gpm

Final drives: outboard planetary

Steiger Panther III PTA-325

Rear PTO: -

Rear RPM: -

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Steiger Panther III PTA-325

Type: open center

Pressure: 2250 psi

Valves: 3 to 5

Total Flow: -

Steering Press: -

Capacity: 22 gal

Pump flow: 29.3 gpm

SVC flow: 8 gpm

Steiger Panther III PTA-325

Gears: 10 forward and 2 reverse

Type: Allison HT 754

Oil Capacity: -

Name: Dana-Spicer 1010-2A

Clutch: -

Steiger Panther III PTA-325

Engine: 325 hp

PTO (Claimed): -

Engine (gross): -

Drawbar (tested): -

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -