Challenger MT755D specifications

Manufacturer: AGCO

Factory: Jackson, Minnesota, USA

Distributor: -

Rear Type: III/IIIN

Rear lift: -

Control: -

Rear lift (at ends): -

Rear lift (at 24"/610mm): -

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 2

Cold-cranking amps: -

Volts: 12

Amp-hours: -

Fuel: 109 gal

Hydraulic system: -

Ag front: 14-inch tracks

Ag rear: 14-inch tracks

Weight (shipping): 31075 lbs

Wheelbase: -

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: -

Height (hood): -

Ground clearance: -

Rear tread: 72 to 88 inches

Front tread: 72 to 88 inches

2WD turn radius: -

Width: -

Standard tires (ag): -

Height (cab): 135.5 inches

Max weight: 36,000 lbs

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: 300 (2x 150amp)

Battery volts: 12

Bore/Stroke: 4.41x5.87 inches

Compression: -

Cooling: -

Cylinders: -

Displacement: 538 ci

Fuel: -

Rated RPMs: -

Power: -

Torque: -

Torque RPM: -

Emissions: Tier III

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: electric

Starter volts: 12

Chassis: crawler

Steering: electro-hydraulic differential

Brakes: hydraulic wet disc

Cab: Cab standard.

Differential lock: -

Transmission: 16-speed full power shift

Pump flow: 43.5 gpm

Final drives: -

Rear PTO: independent

Rear RPM: 1000 (1.75)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Type: closed-center pressure-flow compensated (PFC)

Pressure: 2900 psi

Valves: 4 to 6

Total Flow: -

Steering Press: -

Capacity: -

Pump flow: 43.5 gpm

SVC flow: 36 gpm

Gears: 16 forward and 4 reverse

Type: Caterpillar

Oil Capacity: -

Name: Cat PowerShift

Clutch: -

Engine: -

PTO (Claimed): 260 hp

Engine (gross): 327 hp

Drawbar (tested): 251.60 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -