Challenger MT565E specifications

Manufacturer: AGCO

Factory: Jackson, Minnesota, USA

Distributor: -

Rear Type: III/IIIN

Rear lift: -

Control: -

Rear lift (at ends): 13500 lbs

Rear lift (at 24"/610mm): 9,189 lbs

Front Hitch: optional

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: -

Cold-cranking amps: -

Volts: 12

Amp-hours: -

Fuel: 114 gal

Hydraulic system: 26.4 gal

Ag front: -

Ag rear: -

Weight (shipping): -

Wheelbase: 117 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: -

Height (hood): -

Ground clearance: -

Rear tread: -

Front tread: -

2WD turn radius: -

Width: -

Standard tires (ag): -

Height (cab): 110.2 inches

Max weight: -

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: -

Battery volts: 12

Bore/Stroke: 4.134x5.00 inches

Compression: -

Cooling: -

Cylinders: -

Displacement: 402.8 ci

Fuel: -

Rated RPMs: 2100

Power: -

Torque: -

Torque RPM: -

Emissions: Tier III

Emission control: -

Maximum power: -

Fuel system: electronic high pressure common rail

Pre-heating: -

Compression: -

Starter: electric

Starter volts: 12

Chassis: 4x4 MFWD 4WD

Steering: power

Brakes: hydraulic wet disc

Cab: Cab standard with air-conditioning. Auto-Guide 3000

Differential lock: electro-hydraulic front and rear

Transmission: 16-speed four speed power shift

Pump flow: -

Final drives: inboard planetary

Rear PTO: independent

Rear RPM: 540/540E/1000

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: independent*Optional

Front RPM: 1000 (1.375)

Type: closed-center load sensing

Pressure: 2900 psi

Valves: 4

Total Flow: 29 gpm

Steering Press: -

Capacity: 26.4 gal

Pump flow: -

SVC flow: 26.4 gpm

Gears: 24 forward and reverse

Type: AutoPower VI

Oil Capacity: -

Name: AutoPower IV

Clutch: -

Engine: -

PTO (Claimed): 155 hp

Engine (gross): 185 hp

Drawbar (tested): 138.9 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -