Challenger MT565D specifications

Manufacturer: AGCO

Factory: Beauvais, France

Distributor: -

Rear Type: III

Rear lift: 12500 lbs

Control: electronic lower link draft control

Rear lift (at ends): -

Rear lift (at 24"/610mm): 9,189 lbs

Front Hitch: optional

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 2

Cold-cranking amps: 600

Volts: 12

Amp-hours: -

Fuel: 114 gal

Hydraulic system: 26.4 gal

Ag front: -

Ag rear: -

Weight (shipping): 17000 lbs

Wheelbase: 117.8 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 200.2 inches

Height (hood): -

Ground clearance: -

Rear tread: -

Front tread: -

2WD turn radius: -

Width: -

Standard tires (ag): -

Height (cab): 110.2 inches

Max weight: -

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: 175

Battery volts: 12

Bore/Stroke: 4.134x5.00 inches

Compression: -

Cooling: -

Cylinders: -

Displacement: 402.8 ci

Fuel: -

Rated RPMs: 2100

Power: 180 hp

Torque: -

Torque RPM: -

Emissions: Tier III

Emission control: -

Maximum power: -

Fuel system: electronic high pressure common rail

Pre-heating: -

Compression: -

Starter: electric

Starter volts: 12

Chassis: 4x4 MFWD 4WD

Steering: hydrostatic power

Brakes: hydraulic wet disc

Cab: Cab standard with air-conditioning. AGCO System 150 (optional)

Differential lock: electro-hydraulic full locking

Transmission: 16-speed four speed power shift

Pump flow: -

Final drives: inboard planetary

Rear PTO: independent

Rear RPM: 540/1000

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: independent*Optional

Front RPM: 1000 (1.375)

Type: closed center load sensing (CCLS)

Pressure: 2900 psi

Valves: 2 to 4

Total Flow: 29 gpm

Steering Press: -

Capacity: 26.4 gal

Pump flow: -

SVC flow: 24.3 gpm

Gears: 24 forward and reverse

Type: AutoPower VI

Oil Capacity: -

Name: AutoPower IV

Clutch: -

Engine: 180 hp

PTO (Claimed): 150 hp

Engine (gross): -

Drawbar (tested): 137.2 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -