Challenger MT275 specifications

Manufacturer: Iseki

Factory: Matsuyama, Japan

Distributor: Challenger (a part of AGCO)

Rear Type: I

Rear lift: 2,100 lbs

Control: position control

Rear lift (at ends): 2,755 lbs

Rear lift (at 24"/610mm): 2535 lbs

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): 98 inches

Dump angle: 30

Rollback angle: 16

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: Challenger ML30

Clearance, dumped bucket: 80 inches

Reach at ground: -

Dump reach: 22.5 inches

Breakout force (bucket): -

Bucket width: 10 inches

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 1

Cold-cranking amps: -

Volts: 12

Amp-hours: -

Fuel: -

Hydraulic system: -

Ag front: -

Ag rear: -

Weight (shipping): -

Wheelbase: 68.5 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 118.5 inches

Height (hood): -

Ground clearance: -

Rear tread: 45 to 56.8 inches

Front tread: -

2WD turn radius: -

Width: 60.6 inches

Standard tires (ag): -

Height (cab): -

Max weight: -

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: -

Battery volts: 12

Bore/Stroke: 3.43x3.30 inches

Compression: 21.7:1

Cooling: -

Cylinders: -

Displacement: 91.4 ci

Fuel: -

Rated RPMs: 2600

Power: -

Torque: -

Torque RPM: -

Emissions: -

Emission control: -

Maximum power: -

Fuel system: indirect injection

Pre-heating: glow plugs

Compression: -

Starter: -

Starter volts: 12

Chassis: 4x4 MFWD 4WD

Steering: power

Brakes: wet disc

Cab: Two-post ROPS

Differential lock: mechanical rear

Transmission: -

Pump flow: 7.7 gpm

Final drives: spur gear

Rear PTO: independent

Rear RPM: 540 (1.375)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: independent*Optional

Mid RPM: 2000

Clutch: electro-hydraulic wet disc

Engine RPM: -

Front PTO: -

Front RPM: -

Type: open center

Pressure: 2130 psi

Valves: -

Total Flow: 12.2 gpm

Steering Press: -

Capacity: -

Pump flow: 7.7 gpm

SVC flow: -

Gears: 8 forward and reverse

Type: -

Oil Capacity: -

Name: SynchroShuttle

Clutch: -

Engine: -

PTO (Claimed): 32.4 hp

Engine (gross): 40.1 hp

Drawbar (tested): -

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -