New Holland row-crop TM190 specifications

Manufacturer: New Holland

Factory: Basildon, England

Distributor: -

Rear Type: 2/3N

Rear lift: 17,085 lbs

Control: electronic lower-link draft control

Rear lift (at ends): -

Rear lift (at 24"/610mm): -

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 1

Cold-cranking amps: 1300

Volts: 12

Amp-hours: -

Fuel: 105.1 gal

Hydraulic system: 6.6 gal

Ag front: -

Ag rear: -

Weight (shipping): 14,782 lbs

Wheelbase: 110.9 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 189.4 inches

Height (hood): -

Ground clearance: 18 inches

Rear tread: 60 to 96 inches

[152 to 243 cm]

60 to 100 inches

[152 to 254 cm]

60 to 118 inches

Front tread: -

2WD turn radius: -

Width: -

Standard tires (ag): -

Height (cab): -

Max weight: -

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: 120

Battery volts: 12

Bore/Stroke: 4.094x5.196 inches

Compression: -

Cooling: -

Cylinders: -

Displacement: 274.6 ci

Fuel: -

Rated RPMs: 2200

Power: 190 hp

Torque: -

Torque RPM: 1400

Emissions: Tier III

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: electric

Starter volts: 12

Chassis: 4x4 MFWD 4WD

Steering: hydrostatic power

Brakes: differential hydraulic wet disc

Cab: Cab standard with heat and air-conditioning. Optional heated air-ride seat.

Differential lock: -

Transmission: -

Pump flow: 31.7 gpm

Final drives: -

Rear PTO: independent

Rear RPM: 540/1000

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Type: closed center load sensing (CCLS)

Pressure: 2750 psi

Valves: -

Total Flow: 48.7 gpm

Steering Press: -

Capacity: 6.6 gal

Pump flow: 31.7 gpm

SVC flow: -

Gears: 17 forward and 6 reverse

Type: Power Command

Oil Capacity: -

Name: -

Clutch: -

Engine: 190 hp

PTO (Claimed): 160 hp

Engine (gross): -

Drawbar (tested): 137.6 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -