Massey Ferguson 8680 specifications

Manufacturer: Massey Ferguson

Factory: Beauvais, France

Distributor: -

Rear Type: III, IV

Rear lift: -

Control: -

Rear lift (at ends): 26,460 lbs

Rear lift (at 24"/610mm): 21,336 lbs

Front Hitch: III

Front lift (at ends): 11,020 lbs

Drawbar: Cat. 3

Height (to pin): 189 inches

Dump angle: 54°

Rollback angle: 40°

Breakout force (lift): 7319 lbs

Lift to full height (at pin): 5335 lbs

Lift to full height (at 800mm): 4696 lbs

Loader type: Massey Ferguson 1090

Clearance, dumped bucket: 139 inches

Reach at ground: 106 inches

Dump reach: 37 inches

Breakout force (bucket): -

Bucket width: 96 inches

Raise time to height: 5.3 s

Bucket dump time: -

Lowering time: 3.6 s

Rollback time: 2.2 s

Number: -

Cold-cranking amps: -

Volts: 12

Amp-hours: -

Fuel: 120 gal

Hydraulic system: 39.6 gal

Ag front: 16.9R-28

Ag rear: 18.4R-42

Weight (shipping): 24,250 lbs

Wheelbase: 122.2 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 223.2 inches

Height (hood): -

Ground clearance: -

Rear tread: 58 to 5 inches

Front tread: -

2WD turn radius: -

Width: -

Standard tires (ag): Front: 420/85R34. Rear: 480/80R50

Height (cab): 133.1 inches

Max weight: 38,890 lbs

Front axle: 4WD

Rear axle: Bar: 4.33 by 105 inches

Ground: negative

Charging system: alternator

Charging amps: 240*Dual 120A alternators.

Battery volts: 12

Bore/Stroke: 4.37x5.71 inches

Compression: 16.7:1

Cooling: -

Cylinders: -

Displacement: 512.6 ci

Fuel: -

Rated RPMs: 2200

Power: 320 hp

Torque: 1100 lb-ft

Torque RPM: 1500

Emissions: Tier III

Emission control: selective catalytic reduction (SCR)

Maximum power: 350 hp

Fuel system: electronic high pressure common rail

Pre-heating: thermostart

Compression: -

Starter: electric

Starter volts: 12

Chassis: 4x4 MFWD 4WD

Steering: power

Brakes: hydraulic wet disc

Cab: Cab standard with heat and air-conditioning. Optional heated seat, power adjustable mirrors, and automatic temperature control.

Differential lock: electro-hydraulic

Transmission: continuously-variable transmission (CVT)

Pump flow: -

Final drives: inboard planetary

Rear PTO: independent

Rear RPM: 1000E/1000 (1.75)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: electro-hydraulic

Engine RPM: -

Front PTO: independent

Front RPM: 1000 (1.375)

Type: closed center load sensing

Pressure: 2,901 psi

Valves: 4 to 6

Total Flow: 46.2 gpm

Steering Press: -

Capacity: -

Pump flow: -

SVC flow: -

Gears: infinite forward and reverse

Type: continuously-variable transmission (CVT)

Oil Capacity: -

Name: Dyna-VT

Clutch: -

Engine: 320 hp

PTO (Claimed): 275 hp

Engine (gross): -

Drawbar (tested): 240.7 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -