John Deere 9520R specifications

Manufacturer: John Deere

Factory: Waterloo, Iowa, USA

Distributor: -

Rear Type: IV/IVN*Optional

Rear lift: -

Control: draft sensing

Rear lift (at ends): -

Rear lift (at 24"/610mm): -

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 4

Cold-cranking amps: 925

Volts: 12

Amp-hours: -

Fuel: 400 gal

Hydraulic system: 58 gal

Ag front: -

Ag rear: -

Weight (shipping): 43550 lbs

Wheelbase: 154 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): 60000 lbs

Length: 319.5 inches

Height (hood): 108 inches

Ground clearance: -

Rear tread: -

Front tread: -

2WD turn radius: -

Width: 193 inches

Standard tires (ag): -

Height (cab): -

Max weight: -

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: 200

Battery volts: -

Bore/Stroke: 5.50x6.00 inches

Compression: 14.0:1

Cooling: -

Cylinders: -

Displacement: 855 ci

Fuel: -

Rated RPMs: 2100

Power: -

Torque: -

Torque RPM: -

Emissions: -

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: -

Starter volts: 12

Chassis: 4x4 articulated 4WD

Steering: articulated power

Brakes: hydraulic wet disc

Cab: Command View Cab III standard with air-conditioning. AutoTrac ready

Differential lock: electro-hydraulic front and rear

Transmission: -

Pump flow: 58 gpm

Final drives: -

Rear PTO: independent*Optional

Rear RPM: 1000 (1.75)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Type: closed-center pressure/flow compensated

Pressure: 2900 psi

Valves: -

Total Flow: -

Steering Press: -

Capacity: 58 gal

Pump flow: 58 gpm

SVC flow: 35 gpm

Gears: 18 forward and 6 reverse

Type: e18 PowerShift

Oil Capacity: 232.5 qts

Name: John Deere Syncro

Clutch: -

Engine: -

PTO (Claimed): 335 hp

Engine (gross): 520 hp

Drawbar (tested): -

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -