John Deere 9360R specifications

Manufacturer: John Deere

Factory: Waterloo, Iowa, USA

Distributor: -

Rear Type: 4N/3

Rear lift: -

Control: electronic draft sensing

Rear lift (at ends): -

Rear lift (at 24"/610mm): -

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 3

Cold-cranking amps: 925

Volts: 12

Amp-hours: -

Fuel: 350 gal

Hydraulic system: -

Ag front: 620/70R42

Ag rear: 620/70R42

Weight (shipping): 34420 lbs

Wheelbase: 137.8 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 282 inches

Height (hood): 106 inches

Ground clearance: -

Rear tread: -

Front tread: -

2WD turn radius: -

Width: 120 inches

Standard tires (ag): -

Height (cab): -

Max weight: -

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: 200

Battery volts: -

Bore/Stroke: 5.50x6.00 inches

Compression: 14.0:1

Cooling: -

Cylinders: -

Displacement: 855 ci

Fuel: -

Rated RPMs: 2100

Power: -

Torque: -

Torque RPM: -

Emissions: -

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: -

Starter volts: 12

Chassis: 4x4 articulated 4WD

Steering: hydraulic power

Brakes: hydraulic wet disc

Cab: CommandView II cab standard with air-conditioning.

Differential lock: fully-locking electro-hydraulic

Transmission: -

Pump flow: 44 gpm

Final drives: -

Rear PTO: independent*Optional

Rear RPM: 1000 (1.75)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Type: closed center pressure flow compensated

Pressure: 2900 psi

Valves: 4 to 6

Total Flow: -

Steering Press: -

Capacity: -

Pump flow: 44 gpm

SVC flow: 37 gpm

Gears: 24 forward and 6 reverse

Type: John Deere PowrSync

Oil Capacity: -

Name: John Deere Syncro

Clutch: -

Engine: -

PTO (Claimed): 287 hp

Engine (gross): 360 hp

Drawbar (tested): 279.64 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -