John Deere 8320R specifications

Manufacturer: John Deere

Factory: Waterloo, Iowa, USA

Distributor: -

Rear Type: IVN/III

Rear lift: -

Control: -

Rear lift (at ends): -

Rear lift (at 24"/610mm): 19,300 lbs

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 2

Cold-cranking amps: 925 (each)

Volts: 12

Amp-hours: -

Fuel: 170.4 gal

Hydraulic system: 10.6 gal

Ag front: -

Ag rear: -

Weight (shipping): -

Wheelbase: 120.1 inches

Clearance front: 23.1 inches

4WD turn radius: -

Weight (ballasted): -

Length: 245 inches

Height (hood): -

Ground clearance: -

Rear tread: -

Front tread: 62 to 88 inches

2WD turn radius: -

Width: 137.3 inches

Standard tires (ag): -

Height (cab): 131.3 inches

Max weight: 44,000 lbs

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: 240

Battery volts: 12

Bore/Stroke: 4.66x5.35 inches

Compression: 16:1

Cooling: -

Cylinders: -

Displacement: 548 ci

Fuel: -

Rated RPMs: 2100

Power: -

Torque: -

Torque RPM: -

Emissions: Interim Tier IV

Emission control: exhaust gas recirculation (EGR)

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: electric

Starter volts: 12

Chassis: 4x4 MFWD 4WD

Steering: hydrostatic power

Brakes: hydraulic wet disc

Cab: CommandView III cab standard with air-conditioning. AutoTrac ready

Differential lock: hydraulic rear standard

Transmission: -

Pump flow: 60 gpm

Final drives: -

Rear PTO: independent

Rear RPM: 1000 (1.75)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Type: closed-center load sensing pressure flow compensated

Pressure: -

Valves: -

Total Flow: -

Steering Press: -

Capacity: 10.6 gal

Pump flow: 60 gpm

SVC flow: 35 gpm

Gears: 16 forward and 4 reverse

Type: John Deere PowerShift

Oil Capacity: -

Name: John Deere Automatic PowerShift

Clutch: -

Engine: -

PTO (Claimed): 269 hp

Engine (gross): 320 hp

Drawbar (tested): 253.13 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -