John Deere 6210R specifications

Manufacturer: John Deere

Factory: Mannheim, Baden-Württemberg, Germany

Distributor: -

Rear Type: 3

Rear lift: 12,017 lbs

Control: load and depth control with electronic lower link sensing

Rear lift (at ends): 13,230 lbs

Rear lift (at 24"/610mm): 4,745 lbs

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: John Deere H360

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: -

Cold-cranking amps: -

Volts: 12

Amp-hours: -

Fuel: 120.2 gal

Hydraulic system: -

Ag front: -

Ag rear: -

Weight (shipping): 16,317 lbs

Wheelbase: 110.2 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 198.8 inches

Height (hood): -

Ground clearance: 22 inches

Rear tread: -

Front tread: -

2WD turn radius: -

Width: 100.4 inches

Standard tires (ag): -

Height (cab): -

Max weight: -

Front axle: -

Rear axle: -

Ground: negative

Charging system: -

Charging amps: -

Battery volts: 12

Bore/Stroke: 4.19x4.33 inches

Compression: -

Cooling: -

Cylinders: -

Displacement: 239 ci

Fuel: -

Rated RPMs: 2100

Power: -

Torque: 725.1 lb-ft

Torque RPM: 1600

Emissions: -

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: -

Starter volts: 12

Chassis: 4x4 MFWD 4WD

Steering: hydrostatic power

Brakes: -

Cab: ComfortView cab standard with air-conditioning. Optional hydraulic cab suspension (HCS Plus). AutoTrac ready. ISOBUS implement connections.

Differential lock: Electro-hydraulic rear with wet disc clutch. Self-locking front.

Transmission: -

Pump flow: 31.1 gpm

Final drives: -

Rear PTO: independent

Rear RPM: 540/540E/1000

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Type: pressure flow compensated (PFC)

Pressure: -

Valves: -

Total Flow: -

Steering Press: -

Capacity: -

Pump flow: 31.1 gpm

SVC flow: -

Gears: 20 forward and reverse

Type: PowrQuad Plus

Oil Capacity: -

Name: John Deere SyncroPlus

Clutch: -

Engine: -

PTO (Claimed): -

Engine (gross): 210 hp

Drawbar (tested): -

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -