John Deere 6140R specifications

Manufacturer: John Deere

Factory: Waterloo, Iowa, USA

Distributor: -

Rear Type: III/IIIN

Rear lift: -

Control: -

Rear lift (at ends): -

Rear lift (at 24"/610mm): 6,475 lbs

Front Hitch: -

Front lift (at ends): -

Drawbar: Category 2 swinging drawbar with hammerstrap

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: -

Cold-cranking amps: 1200

Volts: 12

Amp-hours: -

Fuel: 94 gal

Hydraulic system: -

Ag front: -

Ag rear: -

Weight (shipping): -

Wheelbase: -

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: -

Height (hood): -

Ground clearance: -

Rear tread: -

Front tread: 60 to 88 inches

2WD turn radius: -

Width: -

Standard tires (ag): Front: 12.4R24. Rear: 16.9R30 (4WD)

Height (cab): 110.1 inches

Max weight: -

Front axle: Triple-Link Suspension (TLS) Plus optional

Rear axle: Flange
Optional rack-and-pinion axle: 3.1 by 100.6 inches

Ground: negative

Charging system: alternator

Charging amps: 120

Battery volts: -

Bore/Stroke: 4.19x5.00 inches

Compression: -

Cooling: -

Cylinders: -

Displacement: 276 ci

Fuel: -

Rated RPMs: 2100

Power: -

Torque: -

Torque RPM: -

Emissions: Interim Tier 4

Emission control: exhaust gas recirculation (EGR)

Maximum power: -

Fuel system: high pressure common rail

Pre-heating: -

Compression: -

Starter: electric

Starter volts: 12

Chassis: 4x2 2WD

Steering: hydrostatic power

Brakes: hydraulic wet disc

Cab: Cab standard with air-conditioning.

Differential lock: -

Transmission: -

Pump flow: 30.1 gpm

Final drives: -

Rear PTO: independent

Rear RPM: 540/1000 (1.375)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: hydraulic wet disc

Engine RPM: -

Front PTO: -

Front RPM: -

Type: closed center pressure and flow compensated

Pressure: 2900 psi

Valves: 3 to 4

Total Flow: -

Steering Press: -

Capacity: -

Pump flow: 30.1 gpm

SVC flow: 26.4 gpm

Gears: 16 forward and reverse

Type: PowrQuad PLUS

Oil Capacity: -

Name: PowerQuad Plus

Clutch: -

Engine: -

PTO (Claimed): 111 hp

Engine (gross): 140 hp

Drawbar (tested): 108.79 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -