John Deere 4066R specifications

Manufacturer: John Deere

Factory: Augusta, Georgia, USA

Distributor: -

Rear Type: I

Rear lift: 2500 lbs

Control: position control

Rear lift (at ends): 3130 lbs

Rear lift (at 24"/610mm): -

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): 112 inches

Dump angle: 42

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): 2391 lbs

Lift to full height (at 800mm): -

Loader type: John Deere D170

Clearance, dumped bucket: 90 inches

Reach at ground: 66 inches

Dump reach: 28 inches

Breakout force (bucket): 3487 lbs

Bucket width: 73 inches

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 1

Cold-cranking amps: 770

Volts: 12

Amp-hours: -

Fuel: -

Hydraulic system: 12.5 gal

Ag front: 8.00-16

Ag rear: 13.6-28

Weight (shipping): -

Wheelbase: 73 inches

Clearance front: 13.8 inches

4WD turn radius: -

Weight (ballasted): -

Length: 130.6 inches

Height (hood): -

Ground clearance: -

Rear tread: -

Front tread: -

2WD turn radius: -

Width: -

Standard tires (ag): -

Height (cab): -

Max weight: -

Front axle: -

Rear axle: Regular axle: 3.375 by 91 inches

Ground: negative

Charging system: alternator

Charging amps: 75

Battery volts: 12

Bore/Stroke: 4.25x4.75 inches

Compression: 16.5:1

Cooling: -

Cylinders: -

Displacement: 404 ci

Fuel: -

Rated RPMs: 2600

Power: 65.9 hp

Torque: -

Torque RPM: -

Emissions: -

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: -

Starter volts: 24

Chassis: 4x4 MFWD 4WD

Steering: power

Brakes: -

Cab: Two-post folding ROPS. Cab optional with air-conditioning.

Differential lock: mechanical rear

Transmission: -

Pump flow: 11.2 gpm

Final drives: -

Rear PTO: independent

Rear RPM: 540 (1.375)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: 540@1900; 1000@1900

Front PTO: independent

Front RPM: 1000

Type: open center

Pressure: -

Valves: -

Total Flow: 17.4 gpm

Steering Press: -

Capacity: 12.5 gal

Pump flow: 11.2 gpm

SVC flow: -

Gears: 12 forward and reverse

Type: PowrReverser

Oil Capacity: -

Name: John Deere Syncro-Range

Clutch: -

Engine: 65.9 hp

PTO (Claimed): -

Engine (gross): -

Drawbar (tested): -

Engine (net): -

Gear PTO (Claimed): 54.2 hp

Hydro PTO (Claimed): 51.9 hp