Challenger MT645D specifications

Manufacturer: AGCO

Factory: Jackson, Minnesota, USA

Distributor: -

Rear Type: III

Rear lift: -

Control: -

Rear lift (at ends): -

Rear lift (at 24"/610mm): 21,336 lbs

Front Hitch: III

Front lift (at ends): 11,020 lbs

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 2

Cold-cranking amps: -

Volts: 12

Amp-hours: -

Fuel: 167 gal

Hydraulic system: 29.1 gal

Ag front: -

Ag rear: -

Weight (shipping): 24250 lbs

Wheelbase: 122 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 215.7 inches

Height (hood): -

Ground clearance: -

Rear tread: -

Front tread: -

2WD turn radius: -

Width: -

Standard tires (ag): Front: 480/70R34. Rear: 520/85R46

Height (cab): 133.1 inches

Max weight: -

Front axle: -

Rear axle: Bar: 4.33 by 118 inches

Ground: negative

Charging system: alternator

Charging amps: 240

Battery volts: 12

Bore/Stroke: 4.37x5.71 inches

Compression: 16.7:1

Cooling: -

Cylinders: -

Displacement: 512.6 ci

Fuel: -

Rated RPMs: 2100

Power: -

Torque: -

Torque RPM: -

Emissions: Interim Tier 4

Emission control: selective catalytic reduction (SCR)

Maximum power: 270 hp

Fuel system: electronic high-pressure common rail

Pre-heating: -

Compression: -

Starter: electric

Starter volts: 12

Chassis: 4x4 MFWD 4WD

Steering: hydrostatic power

Brakes: hydraulic wet disc

Cab: Cab standard with air-conditioning and OptiRide Plus hydraulic suspension AGCO System 150 (optional)

Differential lock: electro-hydraulic

Transmission: continuously variable transmission

Pump flow: -

Final drives: planetary

Rear PTO: independent

Rear RPM: 1000/1000E (1.75)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: electro-hydraulic

Engine RPM: -

Front PTO: independent*Optional

Front RPM: 1000 (1.375)

Type: closed center load sensing (CCLS)

Pressure: 2900 psi

Valves: 4 to 6

Total Flow: 46 gpm

Steering Press: -

Capacity: 29.1 gal

Pump flow: -

SVC flow: 26.4 gpm

Gears: infinite forward and reverse

Type: Techstar CVT

Oil Capacity: -

Name: Techstar CVT

Clutch: -

Engine: -

PTO (Claimed): 205 hp

Engine (gross): 240 hp

Drawbar (tested): 170.7 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -