John Deere 7200R specifications

Manufacturer: John Deere

Factory: Waterloo, Iowa, USA

Distributor: -

Rear Type: 3/3N

Rear lift: -

Control: electrohydraulic sensing

Rear lift (at ends): -

Rear lift (at 24"/610mm): 5,915 lbs

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: John Deere H480

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 2

Cold-cranking amps: 925

Volts: 12

Amp-hours: -

Fuel: 133 gal

Hydraulic system: -

Ag front: -

Ag rear: -

Weight (shipping): -

Wheelbase: -

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: -

Height (hood): -

Ground clearance: -

Rear tread: -

Front tread: 60 to 88 inches

2WD turn radius: -

Width: -

Standard tires (ag): -

Height (cab): -

Max weight: -

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: 200

Battery volts: 12

Bore/Stroke: -

Compression: -

Cooling: -

Cylinders: -

Displacement: -

Fuel: -

Rated RPMs: 2100

Power: -

Torque: -

Torque RPM: -

Emissions: -

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: -

Starter volts: -

Chassis: 4x2 2WD (optional)

Steering: hydrostatic power

Brakes: -

Cab: CommandView II Cab. AutoTrac ready, except on 2WD. ISO 1178.3 ISOBUS connection. JDLink and Service ADVISOR Remote available.

Differential lock: full-locking electrohydraulic rear. Limited slip 4WD front axle. Electrohydraulic on TLS Plus front axle with front brakes.

Transmission: -

Pump flow: 32 gpm

Final drives: -

Rear PTO: independent

Rear RPM: 1000 (1.75)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Type: closed-center pressure and flow compensated (PFC)

Pressure: 2958 psi

Valves: -

Total Flow: -

Steering Press: -

Capacity: -

Pump flow: 32 gpm

SVC flow: 35 gpm

Gears: 16 forward and reverse

Type: John Deere PowrQuad Plus

Oil Capacity: -

Name: -

Clutch: -

Engine: -

PTO (Claimed): 164 hp

Engine (gross): 200 hp

Drawbar (tested): 154.77 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -