John Deere 6534 specifications

Manufacturer: John Deere

Factory: Mannheim, Baden-Württemberg, Germany

Distributor: -

Rear Type: II

Rear lift: -

Control: load and depth control with electronic lower-link sensing

Rear lift (at ends): -

Rear lift (at 24"/610mm): -

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: -

Cold-cranking amps: -

Volts: 12

Amp-hours: -

Fuel: 54.7 gal

Hydraulic system: 13.2 gal

Ag front: -

Ag rear: -

Weight (shipping): 11,390 lbs

Wheelbase: 104.3 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 186.1 inches

Height (hood): -

Ground clearance: -

Rear tread: -

Front tread: -

2WD turn radius: -

Width: 91.2 inches

Standard tires (ag): -

Height (cab): -

Max weight: -

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: 90

Battery volts: -

Bore/Stroke: -

Compression: -

Cooling: -

Cylinders: -

Displacement: -

Fuel: -

Rated RPMs: 2300

Power: -

Torque: -

Torque RPM: -

Emissions: -

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: -

Starter volts: -

Chassis: 4x4 MFWD 4WD

Steering: -

Brakes: hydraulic wet disc

Cab: Two-post foldable Roll-Guard ROPS. Cab with air-conditioning optional.

Differential lock: rear electro-hydraulic wet disc

Transmission: -

Pump flow: 21.4 gpm

Final drives: -

Rear PTO: independent

Rear RPM: 540/540E/1000

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: electro-hydraulic wet disc

Engine RPM: 540@2143; 540E@1684; 1000@2208

Front PTO: -

Front RPM: 1000

Type: constant flow load sensing

Pressure: 2,901 psi

Valves: -

Total Flow: -

Steering Press: -

Capacity: 13.2 gal

Pump flow: 21.4 gpm

SVC flow: -

Gears: 12 forward and 4 reverse

Type: John Deere SyncroPlus

Oil Capacity: 52.8 qts

Name: -

Clutch: -

Engine: -

PTO (Claimed): -

Engine (gross): 125 hp

Drawbar (tested): -

Engine (net): 120 hp

Gear PTO (Claimed): -

Hydro PTO (Claimed): -