Challenger MT975E specifications

Manufacturer: Challenger (a part of AGCO)

Factory: Jackson, Minnesota, USA

Distributor: -

Rear Type: -

Rear lift: -

Control: -

Rear lift (at ends): -

Rear lift (at 24"/610mm): -

Front Hitch: -

Front lift (at ends): -

Drawbar: Cat. 5

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 4

Cold-cranking amps: 1000

Volts: 12

Amp-hours: -

Fuel: 390 gal

Hydraulic system: -

Ag front: 800/70R38

Ag rear: 800/70R38

Weight (shipping): 39,767 lbs

Wheelbase: 155.5 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): -

Length: 298 inches

Height (hood): -

Ground clearance: 17.5 inches

Rear tread: -

Front tread: -

2WD turn radius: -

Width: 200 inches

Standard tires (ag): -

Height (cab): 151 inches

Max weight: 60000 lbs

Front axle: Bar: 5.7 by 118 inches
144 by 2997 mm

Rear axle: Bar: 5.7 by 118 inches

Ground: negative

Charging system: alternator

Charging amps: 300*Twin 150A alternators.

Battery volts: 12

Bore/Stroke: 5.71x7.2 inches

Compression: -

Cooling: -

Cylinders: -

Displacement: 1106 ci

Fuel: -

Rated RPMs: 2100

Power: 585 hp

Torque: -

Torque RPM: -

Emissions: Tier III

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: electric

Starter volts: 12

Chassis: 4x4 articulated 4WD

Steering: articulated power

Brakes: hydraulic wet disc

Cab: Pinnacle View Cab standard with air-conditioning. Auto-Guide 3000

Differential lock: electro-hydraulic

Transmission: 16-speed power shift

Pump flow: -

Final drives: inboard planetary

Rear PTO: -

Rear RPM: -

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Type: closed center pressure-flow compensated

Pressure: 2900 psi

Valves: 4 to 6

Total Flow: -

Steering Press: -

Capacity: -

Pump flow: -

SVC flow: 37 gpm

Gears: 16 forward and 4 reverse

Type: -

Oil Capacity: -

Name: Caterpillar Powershift

Clutch: -

Engine: 600 hp

PTO (Claimed): 425 hp

Engine (gross): -

Drawbar (tested): -

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -