Challenger MT835 specifications

Manufacturer: AGCO

Factory: USA

Distributor: -

Rear Type: IVN

Rear lift: -

Control: -

Rear lift (at ends): -

Rear lift (at 24"/610mm): -

Front Hitch: -

Front lift (at ends): -

Drawbar: -

Height (to pin): -

Dump angle: -

Rollback angle: -

Breakout force (lift): -

Lift to full height (at pin): -

Lift to full height (at 800mm): -

Loader type: -

Clearance, dumped bucket: -

Reach at ground: -

Dump reach: -

Breakout force (bucket): -

Bucket width: -

Raise time to height: -

Bucket dump time: -

Lowering time: -

Rollback time: -

Number: 3

Cold-cranking amps: -

Volts: 12

Amp-hours: -

Fuel: 305 gal

Hydraulic system: 70 gal

Ag front: 18-inch track

Ag rear: 18-inch track

Weight (shipping): 40000 lbs

Wheelbase: 118.1 inches

Clearance front: -

4WD turn radius: -

Weight (ballasted): 50000 lbs

Length: 265.9 inches

Height (hood): -

Ground clearance: 18.7 inches

Rear tread: 90 to 128 inches

Front tread: 90 to 128 inches

2WD turn radius: -

Width: 142.1 inches

Standard tires (ag): -

Height (cab): 135.5 inches

Max weight: 36,000 lbs

Front axle: -

Rear axle: -

Ground: negative

Charging system: alternator

Charging amps: 160

Battery volts: 12

Bore/Stroke: 4.41x5.87 inches

Compression: -

Cooling: -

Cylinders: -

Displacement: 538 ci

Fuel: -

Rated RPMs: 2100

Power: -

Torque: -

Torque RPM: -

Emissions: Tier III

Emission control: -

Maximum power: -

Fuel system: -

Pre-heating: -

Compression: -

Starter: electric

Starter volts: 12

Chassis: crawler

Steering: power

Brakes: hydraulic wet disc

Cab: Cab standard with air-conditioning.

Differential lock: -

Transmission: 16-speed full power shift

Pump flow: 43.5 gpm

Final drives: -

Rear PTO: independent

Rear RPM: 1000 (1.75)

Gear Rear PTO: -

Hydro Rear PTO: -

Mid PTO: -

Mid RPM: -

Clutch: -

Engine RPM: -

Front PTO: -

Front RPM: -

Type: closed center load sensing

Pressure: 2900 psi

Valves: -

Total Flow: -

Steering Press: -

Capacity: 70 gal

Pump flow: 43.5 gpm

SVC flow: 30 gpm

Gears: 16 forward and 4 reverse

Type: Caterpillar

Oil Capacity: -

Name: Cat PowerShift

Clutch: -

Engine: -

PTO (Claimed): 275 hp

Engine (gross): 340 hp

Drawbar (tested): 263.26 hp

Engine (net): -

Gear PTO (Claimed): -

Hydro PTO (Claimed): -